Surface Disinfectants
mikrozid® AF liquid
mikrozid® AF liquid is an alcohol-based, ready-to-use rapid disinfectant for non-invasive medical devices and surfaces. It offers broad efficacy within a very short contact time, leaves no streaks and is ideal for near-patient surfaces with an increased risk of infection.
| Technical Specifications | |
|---|---|
| Product Name | mikrozid® AF liquid |
| Product Type | Alcohol-based rapid surface disinfectant |
| Application | Disinfection of non-invasive medical devices and surfaces (PT2) |
| Efficacy | Broad spectrum efficacy within very short exposure times |
| Use Area | Near-patient surfaces with increased risk of infection |
| Residue | Leaves no streaks |
| Formulation | Ready to use |
| Professional Use | Yes |
| Directions for Use | |
|---|---|
| Application Method | Apply undiluted to the surface, wipe and allow to take effect. Ensure complete wetting and keep the surface moist for the entire exposure time. |
| Pre-cleaning | All visible dirt must be removed before disinfection |
| Maximum Yield | 50 ml/m² |
| Restrictions | Not for final disinfection of semicritical and critical medical devices |
| Incident Reporting | Any serious incidents must be reported to the manufacturer and the competent authority |
| Composition | |
|---|---|
| Active Substances | 24.75 g Ethanol (94%), 35 g Propan-1-ol per 100 g solution |
| Labelling | Contains perfumes (Regulation (EC) No. 648/2004) |
| Chemical & Physical Properties | |
|---|---|
| Form | Liquid |
| Colour | Colourless |
| Odour | Alcohol-like |
| Density | Approx. 0.89 g/cm³ at 20 °C |
| Flash Point | 27 °C (DIN 51755 Part 1) |
| Viscosity (dynamic) | Not determined |
| pH | Not applicable |
Safety & Shelf Life
Use disinfectants safely. Always read the label and product information before use. The product has good material compatibility with metals and plastics (except acrylic glass and alcohol-sensitive paints). Do not use on alcohol-sensitive surfaces such as acrylic glass. Observe fire and explosion protection regulations when using alcoholic disinfectants. Keep away from heat and ignition sources. Wearing protective gloves is recommended. Shelf-life after opening is indicated on the packaging.
mikrozid® AF wipes
mikrozid® AF wipes are alcohol-based, ready-to-use disinfectant wipes for rapid disinfection of non-invasive medical devices and surfaces. They offer broad efficacy within very short contact times, leave no streaks and are ideal for near-patient surfaces with an increased risk of infection.
| Technical Specifications | |
|---|---|
| Product Name | mikrozid® AF wipes |
| Product Type | Alcohol-based rapid disinfectant wipes |
| Application | Disinfection of non-invasive medical devices and surfaces (PT2) |
| Efficacy | Broad spectrum efficacy within very short exposure times |
| Use Area | Near-patient surfaces with increased risk of infection |
| Residue | Leaves no streaks |
| Formulation | Ready to use, pre-soaked non-woven wipes |
| Professional Use | Yes |
| Directions for Use | |
|---|---|
| Surface Disinfection | Thoroughly wipe the surface with the cloth and allow the solution to take effect. Ensure complete wetting and keep the surface moist for the entire exposure time. |
| Pre-cleaning | All visible dirt must be removed before disinfection |
| Application Area | Treat only small areas. The wiping area depends on room temperature and surface structure. |
| Handling Notes | Observe hygienic handling when opening and threading the first wipe. Close the lid immediately after use. |
| Restrictions | Not for final disinfection of semicritical and critical medical devices |
| Refilling Instructions | |
|---|---|
| Preparation | Disinfect hands, put on protective gloves and gown. Ensure gloves are not contaminated during the refilling process. |
| Refill Process | Place the refill bag completely into the dispenser box, cut open the bag edge, pull the first wipe through the guide slot and close the lid securely. |
| Expiry Date | Transfer the expiry date sticker to the dispenser box |
| High-risk Areas | For high-risk areas, the use of refill bags is not recommended by the manufacturer |
| Composition | |
|---|---|
| Active Substances | 24.75 g Ethanol (94%), 35 g Propan-1-ol per 100 g solution |
| Chemical & Physical Properties | |
|---|---|
| Form | Aqueous, alcohol-containing solution on non-woven wipes |
| Colour | Colourless |
| Odour | Alcohol-like |
| Density | Approx. 0.89 g/cm³ at 20 °C (active solution) |
| Flash Point | 27 °C (DIN 51755 Part 1) |
| Viscosity (dynamic) | No data available |
| pH | Not applicable |
Safety & Shelf Life
Use disinfectants safely. Always read the label and product information before use. The product is compatible with metals and plastics (except acrylic glass and alcohol-sensitive paints). Do not use on alcohol-sensitive surfaces such as acrylic glass. Observe fire and explosion protection regulations. Keep away from heat and ignition sources. Protective gloves are recommended. If handled correctly, a shelf life of up to 3 months after opening is guaranteed. For professional use only. Any serious incidents must be reported to the manufacturer and competent authority.
mikrozid® sensitive wipes
mikrozid® sensitive wipes are ready-to-use disinfectant wipes for cleaning and disinfecting medical devices and sensitive surfaces. They are specially designed for alcohol-sensitive materials and offer excellent material compatibility combined with high efficacy.
| Technical Specifications | |
|---|---|
| Product Name | mikrozid® sensitive wipes |
| Product Type | Ready-to-use disinfectant wipes |
| Application | Cleaning and disinfection of medical devices and sensitive surfaces |
| Material Compatibility | Suitable for alcohol-sensitive and delicate medical devices, including ultrasound probes* |
| Use Area | Medical devices and near-patient surfaces requiring gentle disinfection |
| Formulation | Ready to use, aqueous solution on non-woven wipes |
| Professional Use | Yes |
| Directions for Use | |
|---|---|
| Surface Disinfection | Thoroughly wipe the surface with the cloth and allow the solution to take effect. Ensure complete wetting of the surface. |
| Pre-cleaning | All visible dirt must be removed before disinfection |
| Application Area | Treat only small areas. The wiping area depends on room temperature and surface structure. |
| Handling Notes | Observe hygienic handling when opening and threading the first wipe. Close the lid immediately after use. |
| Restrictions | Not for final disinfection of semicritical and critical medical devices |
| Refilling Instructions | |
|---|---|
| Preparation | Disinfect hands, put on fresh protective gloves and a gown. Ensure gloves are not contaminated during the refilling process. |
| Refill Process | Place the refill bag into the dispenser box, cut open the bag, pull the first wipe through the guide slot and close the lid securely. |
| Expiry Date | Transfer the expiry date sticker to the dispenser box |
| High-risk Areas | For high-risk areas, the use of refill bags is not recommended |
| Composition | |
|---|---|
| Active Substances | 0.25 g Alkyl (C12–C16) dimethylbenzyl ammonium chloride (ADBAC/BKC), 0.25 g Didecyldimethylammonium chloride (DDAC), 0.25 g Alkyl (C12–C14) ethylbenzylammonium chloride (ADEBAC) per 100 g solution |
| Chemical & Physical Properties | |
|---|---|
| Form | Aqueous solution on non-woven wipes |
| Colour | Colourless |
| Odour | Characteristic |
| Density | Approx. 1.00 g/cm³ at 20 °C (active solution) |
| Flash Point | Not applicable |
| Viscosity (dynamic) | No data available |
| pH | 5 – 8 at 20 °C |
Safety, Shelf Life & Important Notes
Always read the label and product information before use. The efficacy spectrum must be assessed separately depending on the application area. Disinfectants may differ in their activity against microorganisms and reduced sensitivity or tolerance can occur with certain bacterial strains. Products based on quaternary ammonium compounds may not be sufficiently effective in high-risk areas. For intensive care units, neonatology, burn units or haematology-oncology, schülke recommends products with broader efficacy such as mikrozid® AF wipes or mikrozid® PAA wipes. Protective gloves are recommended. If handled correctly, schülke guarantees a shelf life of up to 3 months after opening. For professional use only. Any serious incidents must be reported to the manufacturer and competent authority.
mikrozid® sensitive liquid
mikrozid® sensitive liquid is a ready-to-use solution for cleaning and disinfecting medical devices and sensitive surfaces. It is specifically designed for alcohol-sensitive materials and offers high efficacy combined with excellent material compatibility.
| Technical Specifications | |
|---|---|
| Product Name | mikrozid® sensitive liquid |
| Product Type | Ready-to-use disinfectant solution |
| Application | Cleaning and disinfection of medical devices and sensitive surfaces |
| Material Compatibility | Suitable for alcohol-sensitive and delicate medical devices, including ultrasound probes* |
| Use Area | Medical devices requiring gentle but effective disinfection |
| Formulation | Ready to use, aqueous solution |
| Professional Use | Yes |
| Directions for Use | |
|---|---|
| Application Method | Apply undiluted to the surface, wipe and allow to take effect. Ensure complete wetting of the surface. |
| Pre-cleaning | All visible dirt must be removed before disinfection |
| Restrictions | Not for final disinfection of semicritical and critical medical devices |
| Incident Reporting | Any serious incidents must be reported to the manufacturer and the competent authority |
| Composition | |
|---|---|
| Active Substances | 0.25 g Alkyl (C12–C16) dimethylbenzyl ammonium chloride (ADBAC/BKC), 0.25 g Didecyldimethylammonium chloride (DDAC), 0.25 g Alkyl (C12–C14) ethylbenzylammonium chloride (ADEBAC) per 100 g solution |
| Chemical & Physical Properties | |
|---|---|
| Form | Liquid |
| Colour | Colourless |
| Odour | Characteristic |
| Density | Approx. 1.00 g/cm³ at 20 °C |
| Flash Point | Not applicable |
| Viscosity (dynamic) | Not determined |
| pH | 5 – 8 at 20 °C |
Safety & Important Notes
Always read the label and product information before use. The efficacy spectrum must be assessed separately depending on the application area. Disinfectants differ in their activity against microorganisms and reduced sensitivity or tolerance may occur with certain bacterial strains. Products based on quaternary ammonium compounds may not be sufficiently effective in high-risk areas. For intensive care units, neonatology, burn units or haematology-oncology, schülke recommends products with broader efficacy such as mikrozid® AF wipes or mikrozid® PAA wipes. Protective gloves are recommended. For professional use only. Any serious incidents must be reported to the manufacturer and competent authority.
aspirmatic®
aspirmatic® is a concentrated solution for the daily cleaning, disinfection and care of dental system units and amalgam separators. It is suitable for use in all common dental treatment units and does not foam, ensuring safe and reliable operation of suction systems.
| Technical Specifications | |
|---|---|
| Product Name | aspirmatic® |
| Product Type | Cleaning, disinfection and care concentrate |
| Application | Dental system units and amalgam separators |
| Usage Frequency | Daily use, 1–2 times per day |
| Compatibility | Suitable for all amalgam separators (e.g. Dürr, Metasys) and dental treatment units (e.g. Sirona, KaVo, Castellini) |
| Foaming Behaviour | Non-foaming |
| Professional Use | Yes |
| Directions for Use | |
|---|---|
| Preparation of Solution | Prepare a 2% solution by adding 40 ml aspirmatic® to 1960 ml cold water (2 litres total). |
| Application Method | Use 2 litres of in-use solution per dental system unit. Suck 1.5 litres through the suction hoses and pour the remaining 0.5 litres into the rinse basin. |
| Contact Time | Minimum 60 minutes or overnight |
| Recommended Timing | At noon and at the end of the working day |
| Additional Recommendation | Use aspirmatic® cleaner 1–2 times per week instead of aspirmatic® |
| Composition | |
|---|---|
| Active Substance | 7.5 g dioctyl dimethyl ammonium chloride per 100 g concentrate |
| Surfactants | < 5% non-ionic surfactants, < 5% soap (according to Regulation (EC) No 648/2004) |
Safety & Important Notes
Always read the label and product information before use. Protective gloves must be worn. Do not use after the expiration date. Do not mix aspirmatic® concentrate or ready-to-use solution with aspirmatic® cleaner. For professional use only.
aspirmatic® cleaner
aspirmatic® cleaner is a special cleaner for dental suction systems, mouth rinsing basins and drain lines. It supports weekly deep cleaning, prevents deposits and contamination, and ensures hygienic safety without foam formation.
| Technical Specifications | |
|---|---|
| Product Name | aspirmatic® cleaner |
| Product Type | Special cleaner for dental suction systems |
| Application | Dental suction systems, mouth rinsing basins and drain lines |
| Usage Frequency | Weekly special cleaning, 1–2 times per week |
| Compatibility | Suitable for all types of amalgam traps and leading dental units |
| Foaming Behaviour | No disruptive foam formation |
| Handling | Simple and safe handling |
| Professional Use | Yes |
| Directions for Use | |
|---|---|
| Standard Cleaning | Use a 5% solution once or twice per week instead of the midday disinfection. Prepare 2 litres ready-to-use solution per treatment unit by mixing 1,900 ml water with 100 ml aspirmatic® cleaner. |
| Application Method | Suck approx. 1.5 litres through the suction tubes and pour the remaining 0.5 litres into the mouth rinsing basin. |
| Contact Time | Approx. 1–2 hours (e.g. during lunch break) |
| Post-treatment | After contact time, suck water through the system to remove loosened impurities. |
| Heavy Contamination | Use a 10% solution (1,800 ml water + 200 ml concentrate) for heavy impurities or long periods of standstill. |
| Important Note | Do not leave aspirmatic® cleaner overnight or over the weekend. |
| Composition | |
|---|---|
| Surfactants | 5% non-ionic surfactants (according to Regulation (EC) No. 648/2004) |
| Chemical & Physical Properties | |
|---|---|
| Form | Liquid |
| Colour | Yellow |
| Odour | Nearly odourless |
| Density | Approx. 1.17 g/cm³ at 20 °C |
| Flash Point | > 100 °C (ISO 2719) |
| Viscosity (dynamic) | No data available |
| pH | Approx. 0.9 (concentrate) |
Safety & Important Notes
Always read the label and product information before use. Protective gloves must be worn according to accident prevention regulations (UVV). Do not mix aspirmatic® cleaner with aspirmatic® concentrate or ready-to-use solution. Do not use after the expiration date. For professional use only.
